Kuwait MKCT series side drum jigging machine (two-stage/three-stage)

Category:

KuwaitJigging Machine

Phone:0086-632-5262888

Inquire

Product Description

设备型号	跳汰面积（㎡）	处理能力（t/h）	工作风压（mpa）	跳汰室宽度（mm）	重量(kg)	带料重量(t）	外形尺寸（mm）
CT0622	1.6	10-12	0.015-0.02	620	1504	≈12	3630×1484×2391
CT0822T	2.5	25-30	0.025-0.04	800	6716	≈25	4480×3100×4460
CT0832T	3.2	25-35	0.025-0.03	800	8017	≈32	5400×3200×5100
CT08222T	3.8	25-30	0.035-0.04	800	10228	≈38	6700×3200×4750
CT0833	4.0	25-35	0.035-0.04	800	7545	≈20	6068×1993×4712
CT08232T	4.5	25-35	0.025-0.03	800	12653	≈45	7416×3200×5100
CT1032T	5.0	50-70	0.02-0.03	1000	13859	≈40	6860×3800×6000
CT10322T	7.0	50-70	0.02-0.03	1000	19779	≈56	9390×3800×6000
CT10332T	8.0	50-70	0.02-0.03	1000	21220	≈65	10400×3800×6000
CT10332T	6.0	60-70	0.025-0.035	1200	11128	≈45	6360×2694×4900
CT1232	9.6	60-70	0.025-0.035	1200	16828	≈45	9760×2940×5130
CT1232T	6.0	80-100	0.025-0.035	1200	16501	≈45	7030×3985×6200
CT1533	8.0	80-100	0.025-0.035	1500	19837	≈45	6940×3545×5572
CT1733	10	80-100	0.025-0.035	1700	18479	≈45	7170×3870×5772
CT2233	12.8	80-100	0.025-0.035	2200	23400	≈45	7400×4400×6600
CT2532	15	80-100	0.025-0.035	2500	40396	≈45	7370×5624×7600

Main advantages:

● A combined screen side air chamber jigger is connected by a jigger body and a bucket elevator body to complete the washing and transportation tasks together.

● An air valve system is installed on the upper part, which can control the rhythmic up and down pulsation of the water medium in the machine, so that the washed raw coal can be separated according to the specific gravity.

● The jigger is small in size, low in cost, easy to install and operate, and has a high clean coal recovery rate and low ash content. It is suitable for use in small and medium-sized coal washing plants.

● However, it still has the disadvantage of uneven water flow. Compared with the new composite steady-flow CNC jigger, its washing capacity is lower and its washing accuracy is not as high as that of the new composite steady-flow CNC jigger.

Kuwaitnone

KuwaitMKST series latest compound steady flow jigging machine (CNC/single stage/two stages/three stages)

: next page